PRODUCTS
Wuxi Kcon Optoelectronics Technology Co.,Ltd.

PRODUCTS

Categories

Contact Us

Customer Service Hotline：

+86-400-600-0616

Contact Number：

+86-510-83385555

Email：

sales@wxkcon.com

Address：

No. 9 Plant, 101 Xinjin Road, Xiwu District, Wuxi, Jiangsu Province, China

Web Guiding Systems

KCON Brochure（Web Guide System）.pdf   

System connection

System connection

Specializing in the research, development, production, and sales of tension controllers, web guiding controllers, tension detectors, magnetic powder brakes, magnetic powder clutches, and other industrial automation products. Expert in industrial motion control and web control.

FV-5000A controller

FV-5000A controller

This component receives sensor signals, processes them, and outputs them to the actuator. It is the user interface for operating and setting the correction system and is the control core of the correction system. For any demanding requirements in the field of web guiding systems, precise and reliable correction control can be provided through simple operation of the equipment control panel, aligning the edges of the web material. It also features advanced automatic setting functions that can automatically set the material edge requirements.

FV-2000 controller

FV-2000 controller

This component receives sensor signals, processes them, and outputs them to the actuator. It is the user interface for operating and setting the correction system and is the control core of the correction system. For any demanding requirements in the field of web guiding systems, precise and reliable correction control can be provided through simple operation of the equipment control panel, aligning the edges of the web material. It also features advanced automatic setting functions that can automatically set the material edge requirements.

FV-360 controller

FV-360 controller

This component receives sensor signals, processes them, and outputs them to the actuator. It is the user interface for operating and setting the correction system and is the control core of the correction system. For any demanding requirements in the field of web guiding systems, precise and reliable correction control can be provided through simple operation of the equipment control panel, aligning the edges of the web material. It also features advanced automatic setting functions that can automatically set the material edge requirements.

CCD03 sensor

CCD03 sensor

The CCD03 sensor captures real images without blurring, with higher recogni-tion and more sensitive response speed. In terms of configuration, it is equipped with a 10 megapixel lens and a capture frequency of 120 frames per second. The standard accuracy can reach 0.02 millimeters, and the detection range is wide, up to 25mm. No need to move the sensor due to changes in material width. Multiple algorithms are integrated: transparent film,laser film, non-woven fabric, and dashed line tracking. Easy to operate, completed in two steps,eliminating the tedious operation of ordinary CCD.

FR-80 sensor

FR-80 sensor

The ultrasonic transducer of the ultrasonic sensor oscillates at 220KHz and outputs up to 1KHz. Between the ultrasonic transmitter and receiver, the receiver receives the part of the ultrasonic wave that is not blocked by the material. Airflow and temperature changes can be compensated for, so the accuracy can reach 0.01mm. It can test the edge position of non-sound-transmitting materials and is not affected by paper ash-like pollution.

FR-100 sensor

FR-100 sensor

The ultrasonic transducer of the ultrasonic electric eye emits ultrasonic waves at a frequency of 220KHz with an output of up to 1KHz. Between the ultrasonic emitter and the receiver, the receiver receives the part of the ultrasonic wave that is not blocked by the material. Airflow and temperature changes can be compensated for, so the accuracy can reach 0.01mm. It can test the edge position of non-sound-transmitting materials and is not affected by paper ash-like pollution.

FR-56 sensor

FR-56 sensor

The ultrasonic transducer of the ultrasonic sensor oscillates at 220KHz and outputs up to 1KHz. Between the ultrasonic transmitter and receiver, the receiver receives the part of the ultrasonic wave that is not blocked by the material. Airflow and temperature changes can be compensated for, so the accuracy can reach 0.01mm. It can test the edge position of non-sound-transmitting materials and is not affected by paper ash-like pollution.

JK-3 sensor

JK-3 sensor

The JK-3 infrared edge detection sensor belongs to the high-precision transmission detection method, and the emitting part uses an imported infrared emitting tube to emit a modulated frequency light source (not affected by natural light interference) The receiving part adopts imported composite silicon photovoltaic cells, which detect the edge of the material and convert the detected position signal into corresponding analog voltage and dual TTL level output The sensor is  equipped with temperature compensation and overcur- rent/overvoltage protection circuits inside.

< 1234 >